2004/12/01 Lifting Brackets and Hardware are Available {1122} Caterpillar


Lifting Brackets and Hardware are Available {1122}
`
Engine:
  • 3600 Diesel
  • G3600
  • Lifting brackets and hardware are available for lifting the engine block. The lifting brackets, spacers, and bolts are for lifting the engine blocks without the cylinder heads.

    Refer to Table 1 and Illustration 1 for an in-line engine.

    Refer to Table 2 and Illustration 2 for a vee engine.

    Table 1
    Parts List    
    Item     Qty     Part Number     Description    
    1     2     101-8187     Lifting Bracket    
    2     8     218-0660     Bolt    
    3     8     214-6044     Spacer    



    Illustration 1g01128759

    In-line engine

    (1) Lifting bracket

    (2) Bolt

    (3) Spacer

    Table 2
    Parts List    
    Item     Qty     Part Number     Description    
    2     16     218-0660     Bolt    
    3     16     214-6044     Spacer    
    4     4     101-8189     Lifting Bracket    



    Illustration 2g01128760

    (2) Bolt

    (3) Spacer

    (4) Lifting bracket

    Information System:

    Installation of 262-6141 Alarm Gp {7406}
    345C Excavator Machine System Specifications Stick - 3.0 m (9.84 ft)
    345C Excavator Machine System Specifications Stick
    345C Excavator Machine System Specifications Stick
    3500 and 3500B Engines Reference Numbers
    3126B Petroleum Engine Injection Actuation Pressure - Test
    G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
    C11 and C13 Engines for Caterpillar Built Machines Lubrication System
    C11 and C13 Engines for Caterpillar Built Machines General Information
    C4.4 Industrial Engine Electrical System
    2004/12/01 New Lockwasher Will Improve Varistor Reliability {4466}
    3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Install
    C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Remove
    C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
    C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
    3508C, 3512C and 3516C Marine Engines Piston Cooling Jets - Remove and Install
    C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
    C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Install
    C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove
    C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
    345C Excavator Machine System Specifications Stick - 3.4 m (11.16 ft)
    3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Refill Capacities and Recommendations
    C32 Marine Engines Diagnostic Code Cross Reference
    C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Rocker Shaft - Assemble