2013/11/08 New Exhaust Manifold Components Are Used on Certain 3512C Locomotive Engines {1059} Caterpillar


New Exhaust Manifold Components Are Used on Certain 3512C Locomotive Engines {1059}
`
2013/11/08 [SEBD9910]
AIR INLET AND EXHAUST SYSTEM
MANIFOLD GP-EXHAUST
2014/07/07 New V Band Clamps and Mounting Hardware Are Used on Certain 3512C Engines {1059, 1071, 7553}
2013/11/08 New Exhaust Manifold Components Are Used on Certain 3512C Locomotive Engines {1059}
Engine:
3512C (S/N: NJT1-UP)

Description of Change: The new exhaust manifold components being used include the addition of a gasket used in the joints. The gasket helps prevent exhaust leaks at the rear of the manifold.

Adaptable To:




Illustration 1g03505791

(1) Exhaust manifold and bellow assembly

Table 1 contains the new part numbers. Table 2 contains the effective serial numbers.

ReferenceRefer to Disassembly and Assembly, KENR8129, "Exhaust Manifold - Remove and Install" for installation instructions.

Table 1
Item     Qty     New Part Number     Part Description    
1     2     229-5332     Seal    
2     2     229-5333     Seal    
3     4     374-4581     Exhaust Gasket    
4     2     384-0515     Bellows As    
5     4     384-0519     Band Clamp    
6     1     415-5861     Exhaust Manifold    
7     1     415-5862     Exhaust Manifold    

Table 2
Effective Serial Numbers    
S/N:NJT00230-UP