3500 and 3500B Engines Reference Numbers Caterpillar


Reference Numbers
`

Identification of the items in Table 1 may be needed in order to obtain parts and service. Some of the information is on the engine Serial Number Plate and/or Information Plate. Locate the information for your engine. Record the information on the appropriate space in Table 1. Make a copy of this list for a record. Retain the information for future reference.

The top level part numbers in the Parts Manual for the engine are listed with the engine arrangement number. Occasionally, an arrangement may be slightly modified before the product is shipped from the factory. In these cases, a modification number indicates that the arrangement has been modified.

The packaging arrangement may also be called a pricing arrangement or a customer arrangement. This is the total package with attachments and options that are not included in the engine arrangement.

The performance specification can be used by your AVSpare dealer with the Technical Marketing Information system. Before the engine leaves the factory, the engine performance is tested. Detailed performance data is recorded. The performance specification number can be used for obtaining the data.

Table 1
Reference Information 
Engine Model   
Serial Number   
Arrangement Number   
Modification Number   
Packaging Arrangement   
Turbocharger   
Fuel Filter Element   
Lubrication Oil Filter Element   
Auxiliary Oil Filter Element   
Air Cleaner Element   
Fan Drive Belt   
Alternator Belt   
Capacity of the Lubrication System   
Capacity of the Cooling System   
Performance Specification Number   
Personality Module   
Low Idle rpm   
High Idle rpm   
Full Load rpm   
Power Rating   

Information System:

3126B Petroleum Engine Injection Actuation Pressure - Test
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Lubrication System
C11 and C13 Engines for Caterpillar Built Machines General Information
C4.4 Industrial Engine Electrical System
2004/12/01 New Lockwasher Will Improve Varistor Reliability {4466}
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Install
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Remove
12M, 140, 140M, 150, 160M and 160 Motor Graders Hydraulic and Steering System Calibration Procedures
3126B Petroleum Engine Diagnostic Code Cross Reference
3508C, 3512C and 3516C Marine Engines Flywheel - Remove and Install
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Assemble
345C Excavator Machine System Specifications Stick
345C Excavator Machine System Specifications Stick
345C Excavator Machine System Specifications Stick - 3.0 m (9.84 ft)
Installation of 262-6141 Alarm Gp {7406}
2004/12/01 Lifting Brackets and Hardware are Available {1122}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Remove
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3508C, 3512C and 3516C Marine Engines Piston Cooling Jets - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump - Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove