C9 Industrial Engines Plate Locations and Film Locations Caterpillar


Plate Locations and Film Locations
`
1.1. Serial Number Plate (1)
2.1. Information Plate (2)


Illustration 1g01129459
(1) Serial Number Plate


Illustration 2g01129463
(2) Information Plate

AVSpare engines are identified by serial numbers and by arrangement numbers. These numbers are shown on the engine serial number plate and on the engine information plate. AVSpare dealers need these numbers in order to determine the components that were included with the engine. This permits accurate identification of replacement part numbers.

Serial Number Plate (1)

The engine serial number plate is located on the upper right side of the engine block.

Engine serial number ____________________

Engine model ____________________

Arrangement number ____________________

Information Plate (2)

The engine information plate is located on the valve cover base near the front of the left side of the engine.

Engine Serial Number ____________________

Engine Arrangement Number ____________________

Engine Modification Number ____________________

The engine identification plate also contains other important information about the engine.

Information System:

C7 Petroleum Engine Engine Oil and Filter - Change
3508C, 3512C and 3516C Marine Engines Turbocharger Inlet Pressure Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Coolant Temperature Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Evaporator Coil
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Receiver-Dryer
C32 Marine Engines Analog Sensor Supply Circuit - Test
C9 Industrial Engines Diagnostic Flash Code Retrieval
C7 Industrial Engine Engine Monitoring System (EMS)
3126B Petroleum Engine ECM/Personality Module - Test
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
345 MHPUC Mobile Hydraulic Power Unit Machine System Specifications Fuel Lines
3500B High Displacement Generator Set Engines Reference Material
345C Excavator Hydraulic System Pump Control (Output Flow) - Adjust
2004/12/01 Updated Information to Operation and Maintenance Manual, SEBU6251 , "Engine Oil (3116 and 3126 Marine Engines" {1348, 7581}
3508C, 3512C and 3516C Marine Engines Engine Oil Pressure Sensor - Remove and Install
3406C Engines for Caterpillar Built Machines Alternator and Regulator
3508C, 3512C and 3516C Marine Engines Fuel Pressure Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Crankcase Pressure Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Aftercooler Coolant Temperature Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Fuel Priming Pump - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Coolant Temperature Switch - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install