C32 Marine Auxiliary Engine Diagnostic Flash Code Retrieval Caterpillar


Diagnostic Flash Code Retrieval
`
1.1. Cross-Reference for Flash Code to CID-FMI and Event Code

Cross-Reference for Flash Code to CID-FMI and Event Code

Table 1
Cross-Reference from Flash Code to CID-FMI Code/Event Code and Description to SPN-FMI Code 
Flash Code  CID-FMI Code/Event Code and Description  SPN-FMI Code 
N/A  E119(1) Low Fuel Level  N/A 
E173(1) High Exhaust Temperature Warning 173-15 
E363(1)High Fuel Supply Temperature 174-15 
E363(2)High Fuel Supply Temperature
E363(3)High Fuel Supply Temperature
168-0 Electrical System Voltage high - most severe (3) 174-0 
247-9 SAE J1939 Data Link abnormal update rate N/A 
535-8 Exhaust Temperature Sensor abnormal frequency, pulse width, or period N/A 
13  174-3 Fuel Temperature Sensor voltage above normal  174-3 
174-4 Fuel Temperature Sensor voltage below normal
17  168-1 Electrical System Voltage low - most severe (3)  174-4 
21  41-3 8 Volt DC Supply voltage above normal  678-3 
41-4 8 Volt DC Supply voltage above normal 678-4 
262-3 5 Volt Sensor DC Power Supply voltage above normal 620-3 
262-4 5 Volt Sensor DC Power Supply voltage below normal 620-4 
23  175-3 Engine Oil Temperature Sensor voltage above normal  175-3 
175-4 Engine Oil Temperature Sensor voltage below normal 175-4 
24  100-3 Engine Oil Pressure Sensor voltage above normal  100-3 
100-4 Engine Oil Pressure Sensor voltage below normal 100-4 
100-10 Engine Oil Pressure Sensor abnormal rate of change 100-10 
25  1785-3 Intake Manifold Pressure Sensor voltage above normal  106-3 
1785-4 Intake Manifold Pressure Sensor voltage below normal 106-4 
1785-10 Intake Manifold Pressure Sensor abnormal rate of change N/A 
27  110-3 Engine Coolant Temperature Sensor voltage above normal  110-3 
110-4 Engine Coolant Temperature Sensor voltage below normal 110-4 
32  91-8 Throttle Position Sensor abnormal frequency, pulse width, or period  91-8 
34  190-8 Engine Speed Sensor abnormal frequency, pulse width, or period  190-8 
342-8 Secondary Engine Speed Sensor abnormal frequency, pulse width, or period 723-8 
35  E362(1) Engine Overspeed  190-15 
E362(3) Engine Overspeed 190-0 
37  94-3 Fuel Delivery Pressure Sensor voltage above normal  94-3 
94-4 Fuel Delivery Pressure Sensor voltage below normal 94-4 
38  172-3 Intake Manifold Air Temperature Sensor voltage above normal  172-3 
172-4 Intake Manifold Air Temperature Sensor voltage below normal 172-4 
42  261-11 Engine Timing Offset fault  228-11 
261-13 Engine Timing Calibration calibration required 228-13 
46  E360(1) Low Engine Oil Pressure  100-17 
E360(3) Low Engine Oil Pressure 100-1 
51  168-2 Electrical System Voltage erratic, intermittent, or incorrect  168-2 
56  268-2 Programmed Parameter Fault erratic, intermittent, or incorrect  1111-2 
58  E057(2) Low Engine Coolant Level Derate  111-18 
E059(1) Low Engine Coolant Level Warning 111-17 
59  253-2 Personality Module erratic, intermittent, or incorrect  234-02 
61  E361(1) High Engine Coolant Temperature  110-15 
E361(2) High Engine Coolant Temperature 110-16 
E361(3) High Engine Coolant Temperature 110-0 
63  E096(1) High Fuel Pressure  94-15 
E096(2) High Fuel Pressure 94-16 
E096(3) High Fuel Pressure 94-0 
64  E539(1) High Intake Manifold Air Temperature  1636-15 
E539(2) High Intake Manifold Air Temperature 1636-16 
71  1-5 Cylinder #1 Injector current below normal  651-5 
1-6 Cylinder #1 Injector current above normal 651-6 
72  2-5 Cylinder #2 Injector current below normal  652-5 
2-6 Cylinder #2 Injector current above normal 652-6 
73  3-5 Cylinder #3 Injector current below normal  653-5 
3-6 Cylinder #3 Injector current above normal 653-6 
74  4-5 Cylinder #4 Injector current below normal  654-5 
4-6 Cylinder #4 Injector current above normal 654-6 
75  5-5 Cylinder #5 Injector current below normal  655-5 
5-6 Cylinder #5 Injector current above normal 655-6 
76  6-5 Cylinder #6 Injector current below normal  656-5 
6-6 Cylinder #6 Injector current above normal 656-6 
77  7-5 Cylinder #7 Injector current below normal  657-5 
7-6 Cylinder #7 Injector current above normal 657-6 
78  8-5 Cylinder #8 Injector current below normal  658-5 
8-6 Cylinder #8 Injector current above normal 658-6 
81  9-5 Cylinder #9 Injector current below normal  659-5 
9-6 Cylinder #9 Injector current above normal 659-6 
82  10-5 Cylinder #10 Injector current below normal  660-5 
10-6 Cylinder #10 Injector current above normal 660-6 
83  11-5 Cylinder #11 Injector current below normal  661-5 
11-6 Cylinder #11 Injector current above normal 661-6 
84  12-5 Cylinder #12 Injector current below normal  662-5 
12-6 Cylinder #12 Injector current above normal 662-6 

Information System:

3512B Petroleum Engine Specifications
C9.3 Marine Auxiliary Engines Zinc Rods - Inspect/Replace
C11 and C15 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
C6.6 Marine Generator Set Aftercooler Condensate Drain Valve - Inspect/Clean
3512B Petroleum Engine Refill Capacities and Recommendations
3512B Petroleum Engine Plate Locations and Film Locations
C9 Urban Transit Bus Engine Water Temperature Regulator - Remove and Install
Authorized Classic Machine Models {1000, 7000}
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0096 - FMI 04
3508C, 3512C and 3516C Marine Engines Vibration Damper - Remove and Install
3500B and 3500C Auxiliary Engines, Generator Set Engines, and Generator Sets Refill Capacities and Recommendations
C9 Urban Transit Bus Engine Exhaust Manifold - Remove and Install
3508B, 3512B and 3516B Generator Set Engines Alternator - Remove and Install - Alternator and Mounting Group
3126B Engine for Caterpillar Built Machines Engine Oil Pan
120M, 12M, 140M, 160M, 140, 150 and 160 Motor Graders Articulated Hitch
Installation of a Jacket Water Heater on 3412 Generator Sets{1383}
C11 and C13 Engines for Caterpillar Built Machines E059 Low Engine Coolant Level Warning
C27 and C32 Industrial and Petroleum Engines E360 Low Engine Oil Pressure
C27 and C32 Engines for Caterpillar Built Machines E361 High Engine Coolant Temperature
2005/04/18 An Improved Rear Gear Group is Available for Reverse Engine Rotation {1204, 1206}
C27 and C32 Industrial and Petroleum Engines E539 High Intake Manifold Air Temperature
3500B High Displacement Generator Set Engines Programmable System Parameters
3412E Petroleum Engine ECM/Personality Module - Test
12M and 140 Motor Grader Shipping the Machine