C280-12 Marine Engine Refill Capacities Caterpillar


Refill Capacities
`
1.1. Lubricant Capacities
2.1. Cooling System Capacities

Lubricant Capacities

The capacity of the engine lubrication system includes the capacity of the oil filters that are installed at the factory. Auxiliary oil filter systems (if equipped) will require additional oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.

Table 1
Approximate Refill Capacity of the C280-12 Marine Engine Lubrication System 
Engine crankcase with standard oil pan (1)  908 L (240 US gal) 
Engine crankcase with deep oil pan (2)  1268 L (335 US gal) 
(1) Zero degree installation
(2) Zero degree installation

Cooling System Capacities

To maintain the cooling system, the total cooling system capacity must be determined. The total cooling system capacity will vary between individual installations. The total cooling system capacity can include the following components: engine, expansion tank, heat exchanger, radiator, keel cooler and piping.

Refer to the specifications that are provided by AVSpare or the OEM of the installation. Record the total cooling system capacity in the appropriate Table.

Table 2
Approximate Refill Capacities of the C280-12 Marine Engine Cooling System 
Engine  530 L (140 US gal) 
Standard expansion tank  300 L (80 US gal) 
Optional expansion tank  475 L (125 US gal) 
Heat exchanger  50 L (15 US gal) 
Total cooling   

Information System:

C280-12 Marine Engine Alarms and Shutoffs
C280-08 Tier 4 Engine Filter Screen (Air) - Remove and Install
C280-08 Tier 4 Engine Liquid Level Sensor (DEF) - Remove and Install
C280-12 Marine Engine Product Description
C280-08 Tier 4 Engine Solenoid Valve (DEF Supply) - Remove and Install
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Location of Components (Hydraulic System)
14L Motor Grader Catalyst (SCR) - Remove and Install
14L Motor Grader Nozzle Heater Harness - Remove and Install
C280-08 Tier 4 Engine Manifold (Diesel Exhaust Fluid) - Remove and Install
G3600 A4 Engines Diagnostic Trouble Codes
G3600 A4 Engines Electrical Connectors
374F Excavator Machine Systems Overload Warning - Set - If Equipped
14L Motor Grader Nitrogen Oxide Sensor - Remove and Install - Inlet
C280-12 Marine Engine Engine Air Cleaner Element (Single Element) - Inspect/Replace
C280 Marine and Petroleum Engines Exhaust Bypass Valve - Adjust
14L Motor Grader Nitrogen Oxide Sensor - Remove and Install - Outlet
14L Motor Grader Inlet Module (Catalyst) - Remove and Install - Catalyst
374F Excavator Machine System Swing Motor
374F Excavator Machine System Check Valve
14L Motor Grader Combustion Head - Remove and Install
C4.4 Engines for Caterpillar Built Machines Introduction
C4.4 Engines for Caterpillar Built Machines Fuel Injection
C4.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C4.4 Engines for Caterpillar Built Machines Air Inlet and Exhaust System