320 GC & 323 GC Excavator Engine Starting Caterpillar


Engine Starting
`
320 GC & 323 GC Excavator [M0113054]
ELECTRICAL AND STARTING SYSTEM
STARTING AID GP


NOTICE

This machine is equipped with a Cat® Machine Security System (MSS) and may not start under certain conditions.



NOTICE

The engine start switch must be in the ON position and the engine must be running in order to maintain electrical functions and hydraulic functions. This procedure must be followed in order to prevent serious machine damage.


Note: The engine can start in areas that have temperatures as low as −18°C (0°F). For areas that are colder, a starting kit for cold weather is available.

  1. Move the hydraulic lockout control to the LOCKED position.

    This machine is equipped with an engine neutral start system. The system only allows the engine to start when the lever for the hydraulic lockout control is in the LOCKED position.

  2. Ensure the joysticks and travel controls are in the HOLD position.


    Illustration 1g06209482

  3. The operator passcode, Bluetoothkey or Cat App: Fleet management app must be authenticated before starting the engine. Once authenticated, an "Engine Start Allowed" message will appear across the top of the monitor and the start switch LED will turn green.


    Illustration 2g06579150


    Illustration 3g06579155

  4. Bluetooth devices and passcodes can be registered using the in-cab display if the operator is logged in to the system using a master access account. Contact your Cat dealer for additional information.

    Reference: Refer to Operation and Maintenance Manual, Machine Security System, Operator Login for instructions.

  5. Before you start the engine, check for the presence of bystanders or maintenance personnel. Ensure that all personnel are clear of the machine. Briefly sound the horn before you start the engine.


    Illustration 4g06226447
    (A) Off
    (B) On
    (1) Engine start ring
    (2) Engine start button

  6. Turn the engine start ring (1) to the ON position, then press and hold start button (2) to start the engine. Release the button after the engine has started.

    If the engine is having trouble starting, do not crank the engine for more than 30 seconds. Cranking the engine for more than 30 seconds can damage starting system components.

Information System:

336 Excavator Engine Oil and Filter - Change
777E Prime Off-Highway Truck Systems Cylinder Mounting - Suspension
320 GX and 323 GX Excavator Systems Check Valve (Return Makeup)
Fuel Correction Factor Calculation Procedure for Certain C32 Generator Set Engines with <NOBR>598-7998</NOBR> Engine Software {1250, 1280, 1900, 1901, 1920}
Cat Command for Excavating, Remote Control Operator Console for Excavators Electrical Connector - Inspect
G3500 Engines Electronic Control Module (ECM)
777E Prime Off-Highway Truck Systems Wiring - Cab
320, 320 GC, 323 and 323 GC Excavator Machine Systems Specifications Front Lines
320 GX and 323 GX Excavator Machine Systems Troubleshooting Connector Contact Description
777E Prime Off-Highway Truck Systems Steering Gear
320 GX and 323 GX Excavator Machine Systems Troubleshooting Operator Control Switch (Switch to Battery) - Test
323 Excavator Declaration of Conformity
Payload Calibration When Equipped with Narrow Bucket/Work Tool May Fail on Certain 313 to 352 Excavators {6001, 6101, 6502, 7490, 7494, 7610, 7620}
Cab Avoidance Function may Not Activate When Equipped with Narrow Work Tool on Certain 313 and 315 Excavators {7490}
A New Remanufactured Part is Now Available for Certain Cat Engines {1000, 7754}
320 GX and 323 GX Excavator Systems Main Hydraulic Pump
320 GX and 323 GX Excavator Systems Pump Control (Main Hydraulic) - Main Pump Regulator
320 GX and 323 GX Excavator Systems Relief Valve (Crossover) - Test and Adjust
320 GX and 323 GX Excavator Machine Systems Troubleshooting Relay - Test
320 GX and 323 GX Excavator Systems Travel Motor - Test - Measurement of Case Drain Oil
320 GX and 323 GX Excavator Machine Systems Troubleshooting Sensor Signal (Analog, Passive) - Test
336 Excavator Sound Information and Vibration Information
336 Excavator Plate Locations and Film Locations
A New Oil Lines Group, Filter Support Group, and Front Cover Fastener Group Are Now Used on Certain C175-20 Engines {1261, 1307}