336 Excavator Plate Locations and Film Locations Caterpillar

The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.

Cat^® products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers.

For quick reference, record the identification numbers in the spaces that are provided below the illustration.

Product Identification Number (PIN) Plate

Illustration 1	g06276619

The PIN plate is positioned on the front of the machine, close to the operator compartment.

Illustration 2	g06201159

Manufacturer Name and Address ____________________

Model (A)____________________

Build (B)____________________

Product Identification Number (C)____________________

Bar Code (D)____________________

Month and Year of Manufacture Plate (If Required) (E)____________________

Regional Certification Plate (If Required) (F)____________________

Address of Manufacturer (G)____________________

Issue (H)____________________

Country of Origin Info Plate (If Required) (I)____________________

Local regulation may require documentation of the month and/or year of manufacture in the Operation and Maintenance Manual. Comply with these regulations

European Union

Illustration 3	g06201193

This plate is positioned on the bottom-left side of the plate for the PIN.

Note: The CE plate is on machines that are certified to the European Union requirements that were effective then.

For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.

• Engine Power Primary Engine (kW)____________________

• Engine Power for Additional Engine (kW) (If Equipped) ____________________

• Typical Machine Operating Weight for European Market (kg)____________________

• Year of Construction____________________

• Machine Type ____________________

Illustration 4	g06201198

This plate is positioned on the bottom-left side of the plate for the PIN.

Note: The CE plate is on machines that are certified to the European Union requirements that were effective then.

For machines compliant to 98/37/EC and 89/392/EEC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.

• Engine Power Primary Engine (kW)____________________

• Typical Machine Operating Weight for European Market (kg)____________________

• Year____________________

For manufacturer name and address and the country of origin, see the PIN plate.

Eurasian Economic Union

For machines compliant to the Eurasian Economic Union requirements, the EAC plate is positioned on or near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.

Note: One of the below plates may be installed on the machine.

Illustration 5	g06094564

If equipped, the Month and Year of Manufacture are on the PIN plate.

Illustration 6	g06532250

If equipped, the following information is stamped onto the EAC plate. For quick reference, record this information in the spaces provided below.

• Primary Engine Power (kW)____________________

• Additional Engine Power (kW) ____________________

• Typical Machine Operating Weight for Eurasian Economic Union (kg)____________________

• Month and Year of Manufacture____________________

• Machine Type ____________________

Manufacturer Information

Manufacturer:

Entity authorized by the manufacturer at the territory of Eurasian Economic Union:

Machine Specification Film

The machine specification film is on machines that are going into Japan.

The Japanese Industrial Safety and Health Act requires machine specifications to be displayed on a film that can easily be seen by the operator.

If equipped, this film will be on the cab door.

Illustration 7	g06178867
Typical example

Electromagnetic Emissions

Note: This label is on machines that are going into Canada.

Illustration 8	g06063443

If equipped, this label is located next to the PIN plate. This label verifies that the product meets the requirements of ICES-002 Issue 6. Compliance to ICES-002 Issue 6 is accomplished by meeting electromagnetic emissions industry standard CISPR-12.

Engine Serial Number

This label is on the engine.

Engine Serial Number ____________________

Sound Certification Film

If equipped, this label is on the cab door.

Illustration 9	g02409196
A typical example of this film is shown. Your machine may have a different value

If equipped, this label will be on the cab door. The certification label is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level L_WA at the time of manufacture for the conditions that are specified in "2000/14/EC".

Illustration 10	g03105800
(A) Low Noise Film (B) Super Low Noise Film

If equipped, these certification labels are used to verify the Japan Ministry of Land, Infrastructure, Transportation, and Tourism (MLIT) noise designation according to the Japan "Designation Rule of Low Noise Type Construction Machine".

Low Noise (A) - Verifies that the Japan "MLIT" designates the machine as a "Low Noise" type construction machine.

Super Low Noise (B) - Verifies that the Japan "MLIT" designates the machine as a "Super Low Noise" type construction machine.