Bucket Linkage - VB Family
`
349F and 352F Excavators Machine System Specifications
[UENR2953]
349F and 352F Excavators Machine System Specifications
Auxiliary Hydraulic Lines - Coupler Lines
349F and 352F Excavators Machine System Specifications
Travel Counterbalance Valve
Show/hide table
| |
| Illustration 1 | g06508266 |
|
Typical example | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| Assemble the linkage on the machine by rotating the rod end of the bucket cylinder and by positioning the grease fitting away from the stick. All bores must be free of paint. Coat all the bores for pins with 5P-0960 Grease Cartridge. | |||
| 1 | 2 | 462-2003 Bushing | Bore before assembly is |
| Installation depth is |
|||
| 2 | 6 | Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 3 | 1 | Pin As | Diameter is |
| 4 | 2 | 462-2003 Bushing | Bore before assembly is |
| Installation depth is |
|||
| 5 | 1 | 212-3088 Pin As | Diameter is |
| 6 | 1 | 212-3086 Pin As | Diameter is |
| 7 | 1 | Pin As | Diameter is |
Information System:
C-10 Petroleum Engine
Cooling System - Test
C-10 Petroleum Engine
Cooling System - Check - Overheating
325D and 329D Excavators
Hydraulic System Oil Filter (Return) - Replace
C-10 Petroleum Engine
Inlet Manifold Pressure - Test
325D and 329D Excavators
Hydraulic System Oil Level - Check
3412E Petroleum Engine
Finding Top Center Position for No. 1 Piston
C-10 Petroleum Engine
Fuel System - Prime
C-10 Petroleum Engine
Finding Top Center Position for No. 1 Piston
C-10 Petroleum Engine
Cooling System
3600 to 3600 Electronic Unit Injector (EUI) Upgrade{1000, 1250}
G3524 and G3532 Tandem Maintenance{7002}
2004/11/01
Circuit Breakers - Steps to Consider When Resetting {1420}
C-10 Petroleum Engine
Fuel System Pressure - Test
3512B and 3516B Engines
Camshaft - Remove
3508B, 3512B and 3516B Generator Set Engines
Camshaft - Install
3412E Petroleum Engine
Electronic Control System Components
345D, 349D and 349D2 Excavators Hydraulic System
Relief Valve (Main) - Test and Adjust - Heavy Lift
C11 and C13 Engines for Caterpillar Built Machines
Cooling System
C11 and C13 Engines for Caterpillar Built Machines
Fuel System - Prime
3412E Petroleum Engine
Electrical System
120M, 12M, 140M, 140, 150, 160M and 160 Motor Graders
Power Train
3412E Petroleum Engine
Battery - Test
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package
Fuel Related Components in Cold Weather
C32 Marine and Marine Generator Set Engines
Air Inlet and Exhaust System