C9.3 Tier 4 Final Engines Fuel Filter Base Caterpillar


Fuel Filter Base
`


Illustration 1g03834268
Typical example

Table 1
Specifications for 190-8970 Fuel Priming Pump Gp, 217-8339 Fuel Priming Pump As, and 235-8724 Fuel Transfer Pump Gp 
Item  Qty  Part  Specification Description 
6D-5801 Locknut  Torque to 1.7 ± 0.4 N·m (15.0 ± 3.5 lb in)
179-7267 Plug  Torque to 95 ± 10 N·m (70 ± 7 lb ft)
9S-8002 O-Ring Plug  Torque to 11 ± 2 N·m (97 ± 18 lb in)
162-2222 Spring  Length under test force is 20.21 mm (0.796 inch).
Test force is 1.01 ± 0.05 N (0.23 ± 0.01 lb).
Free length after test is 31.75 mm (1.250 inch)
9S-4167 Hollow Stud  Apply red Loctite 263 to the threads to the length (D) of 11.0 ± 0.5 mm (0.43 ± 0.02 inch).
Torque to 70 ± 15 N·m (52 ± 11 lb ft)

Information System:

2005/01/17 New Bearings for the Engine Oil Pump are Available {1304}
C7 Engines for Caterpillar Built Machines Cooling System - Test
3500 and 3500B Engines Aftercooler Core - Inspect/Clean
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Charge
3412E Petroleum Engine Auxiliary Temperature Sensor Circuit - Test
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Evacuate
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E43 - Damper (Air Outlet)
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Visual Inspection
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating General Troubleshooting Information
312C, 322C, 325C and 330C Excavators and TK1051 Track Feller Buncher Air Conditioning and Heating Machine Preparation for Troubleshooting
C32 Marine Engines Transmission Oil Temperature Sensor Open or Short Circuit - Test
C7 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
3412E Petroleum Engine Intermittent Engine Shutdown
3412E Petroleum Engine Diagnostic Code Cross Reference
3508B, 3512B and 3516B Generator Set Engines Engine Oil Sequence Valves - Remove and Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Remove
C32 Marine Engines Event Codes
C11 and C13 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
3508B, 3512B and 3516B Generator Set Engines Balancer Group (Front) - Remove and Install - 3508B Engine
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Flush
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Recovery
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Required Tools
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Compressor Oil - Check