3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Fuel Filter Base - Electric Fuel Priming Pump Caterpillar


Fuel Filter Base - Electric Fuel Priming Pump
`


Illustration 1g03834750

Table 1
Specifications for 217-7455 Fuel Filter Base 
Item  Qty  Part  Specification Description 
6D-5801 Locknut  Torque to 1.7 ± 0.4 N·m (15.0 ± 3.5 lb in)
179-7267 Plug  Torque to 95 ± 10 N·m (70 ± 7 lb ft)
9S-8002 Plug  Torque to 11 ± 2 N·m (97 ± 18 lb in)
162-2222 Spring  Length under test force is 20.21 mm (0.796 inch).
Test force is 1.01 ± 0.05 N (0.23 ± 0.01 lb).
Free length after test is 31.75 mm (1.250 inch)
170-5146 Hollow Stud  Apply red Loctite 263 to the threads to the length (C) of 26.0 ± 0.5 mm (1.02 ± 0.02 inch).
Torque to 70 ± 15 N·m (52 ± 11 lb ft)

Information System:

Particulate Filter for Stationary Engines in Standby Applications{1091}
3500B Marine Propulsion Engines Auxiliary Water Pump - Inspect
3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Install
3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Remove
C11 and C13 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Alternator - Remove and Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Compressor Oil - Check
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Required Tools
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Recovery
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Flush
3508B, 3512B and 3516B Generator Set Engines Balancer Group (Front) - Remove and Install - 3508B Engine
3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Disassemble
3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Assemble
12M and 140 Motor Grader Roading the Machine
345C Excavator Machine System Specifications Boom Cylinder
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Install
3500B Marine Propulsion Engines Heat Exchanger - Inspect
2005/01/17 Correction to Engine Speed/Timing Sensor-Calibrate {1912}
3406E, C12, C15 and C18 Marine Engines E015 High Engine Coolant Temperature Derate
3406E, C12, C15 and C18 Marine Engines E017 High Engine Coolant Temperature Warning
3126B Industrial Engines E025 High Inlet Air Temperature Derate
3508C, 3512C and 3516C Marine Engines Crankshaft Rear Seal and Wear Sleeve - Install
3508C, 3512C and 3516C Marine Engines Crankshaft Front Seal and Wear Sleeve - Install