C11 and C13 Engines Engine Oil Level Switch - If Equipped Caterpillar


Engine Oil Level Switch - If Equipped
`
C11 and C13 Engines [SENR9887]
BASIC ENGINE
PAN GP-OIL
C11 and C13 Engines Engine Oil Level Switch - If Equipped
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan


Illustration 1g02560518

Table 1
Specification for 213-0677 Liquid Level Switch 
Item  Qty  Part  Specification Description 
213-0677 Liquid Level Switch  Torque to 120 ± 27 N·m (89 ± 20 lb ft)
The switch must close on a rising level in the maximum range of 10.5 mm (0.41 inch)
The switch must open on a falling level in the minimum range of 2.0 mm (0.08 inch)
Contact position is closed at 10.5 mm (0.41 inch).
Contact position is open at 2.0 mm (0.08 inch)

Information System:

3500 Petroleum Engines and Petroleum Generator Sets Specifications
12M and 140 Motor Grader Shipping the Machine
3412E Petroleum Engine ECM/Personality Module - Test
3500B High Displacement Generator Set Engines Programmable System Parameters
C27 and C32 Industrial and Petroleum Engines E539 High Intake Manifold Air Temperature
2005/04/18 An Improved Rear Gear Group is Available for Reverse Engine Rotation {1204, 1206}
C27 and C32 Engines for Caterpillar Built Machines E361 High Engine Coolant Temperature
C27 and C32 Industrial and Petroleum Engines E360 Low Engine Oil Pressure
C11 and C13 Engines for Caterpillar Built Machines E059 Low Engine Coolant Level Warning
Installation of a Jacket Water Heater on 3412 Generator Sets{1383}
120M, 12M, 140M, 160M, 140, 150 and 160 Motor Graders Articulated Hitch
3126B Engine for Caterpillar Built Machines Engine Oil Pan
3516C HD Petroleum Well Service Engine Reference Material
C9 Urban Transit Bus Engine Idler Pulley - Remove and Install
2005/01/31 Improved Lifters are Now Used {1102, 1121, 1123}
3500 Petroleum Engines and Petroleum Generator Sets Control Panel
C9 Urban Transit Bus Engine Air Compressor - Remove and Install
120M, 12M, 140M, 160M, 140, 150 and 160 Motor Graders Drawbar
2005/02/21 Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
Reuse and Salvage for Cast Iron Cylinder Blocks {0679, 1201, 1201}
Electronic Installation Guide{1000}
120M, 12M, 140M, 160M, 140, 150 and 160 Motor Graders Governor (Air Compressor) - Test and Adjust
C1.5 GEN SET Electric Power Generation Refill Capacities and Recommendations
2005/04/25 Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}