Turbocharger
`
C13, C15, and C18 Tier 4 Final Engines
[UENR3381]
C13, C15, and C18 Tier 4 Final Engines
Electric Starting Motor
C13, C15, and C18 Tier 4 Final Engines
Valve Mechanism Cover
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
C13, C15, and C18 Tier 4 Final Engines
Turbocharger
C13, C15, and C18 Tier 4 Final Engines
Turbocharger
C13, C15, and C18 Tier 4 Final Engines
Turbocharger
C13, C15, and C18 Tier 4 Final Engines
Turbocharger
C13, C15, and C18 Tier 4 Final Engines
Turbocharger
C13, C15, and C18 Tier 4 Final Engines
Turbocharger
C13, C15, and C18 Tier 4 Final Engines
Turbocharger
Show/hide table
| |
| Illustration 1 | g02647137 |
Show/hide table
| |
| Illustration 2 | g02647138 |
Show/hide table
| Specifications for 296-7642 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 9N-2038 Turbine Clamp As | Use the following procedure to tighten the turbine clamp assembly:
1. Tighten to 2. Loosen to 3. Again, tighten to |
| 2 | - | - | Opening pressure of the wastegate is |
| 3 | 1 | 268-2960 Clamp As | Torque to |
| 4 | 4 | - | Before assembly, apply Loctite C5A copper anti-seize to the threads.
Torque the nuts to |
Information System:
3512C HD Locomotive Engine
Engine Oil and Filter - Change
3512C HD Locomotive Engine
Engine Air Cleaner Element (Dual Element) - Clean/Replace
303.5E CR, 303.5E2 CR and 304E CR Mini Hydraulic Excavators Machine System Specifications
Main Control Valve
3512C HD Locomotive Engine
Cooling System Coolant (ELC) - Change
C27 and C32 Engines for Caterpillar Built Machines
Inlet Manifold - Remove and Install
C7.1 Industrial Engine
Turbocharger - Inspect - Series Turbochargers
C3.4B Engines
Intake Manifold Air Temperature Is High
C3.4B Engines
Intake Manifold Air Pressure Is Low
312F and 313F Excavators
Hydraulic System Oil Level - Check
316F Excavator
Hydraulic System Oil Filter (Return) - Replace
312F and 313F Excavators
Hydraulic System Oil Filter (Pilot) - Replace
312F and 313F Excavators
Hydraulic System Oil Filter (Case Drain) - Replace
C6.6 Industrial Engine
Fuel Filter Base - Remove and Install - Twin Secondary Fuel Filter
New Control Panel for C4.4 Marine Generator Set{4490, 7490}
3512C HD Locomotive Engine
Maintenance Recommendations
C9 Generator Set
Configuration Parameters
3512C HD Locomotive Engine
Overhaul (Top End)
C9 Generator Set
Engine Oil and Filter - Change
C32 Power Module
Maintenance Interval Schedule - Prime Power
C32 Power Module
Maintenance Interval Schedule - Standby
C3.4B Engines
Diagnostic Trouble Codes
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set
Fuel System - Prime - Duplex Fuel Filter if Equipped
C4.4 (Mech) Marine Generator Set MCS-3
General Information
C15 and C18 Tier 4 Final Engines
Electrical System