374F Excavator Machine System Control Valve Caterpillar

Control Valve

Illustration 1g03506023

Table 1
Specification for 346-7630 Control Valve Gp 
Item  Qty  Part  Specification Description 
Before assembly, lubricate threads of all plugs and connectors lightly with the lubricant that is being sealed. 
352-3045 Bolt  Torque to 125 ± 20 N·m (92 ± 15 lb ft)
Nut  Torque to 9.0 ± 0.5 N·m (79.7 ± 4.4 lb in)
369-4110 Solenoid Valve Gp  Before assembly, lubricate bore lightly with the hydraulic oil.
Torque to 50 ± 5 N·m (37 ± 4 lb ft)

Information System:

C18 Marine Engines Fumes Disposal Filter Element - Replace
G3600 A4 Engines Crankcase Pressure Is High
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders General Information (Steering System)
C18 Marine Engines Engine Valve Lash - Check
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Oil Cooler (Hydraulic Fan)
C18 Marine Engines Coolant Temperature Regulator - Replace
G3600 A4 Engines Cylinder Is Noisy
C18 Marine Engines Coolant Sample (Level 1) - Obtain
C18 Marine Engines Coolant Level - Check
C18 Marine Engines Coolant Extender (ELC) - Add
C280-08 Tier 4 Engine Manifold (DEF Air) - Remove and Install
C280-08 Tier 4 Engine Diesel Exhaust Fluid Pump - Remove and Install
374F Excavator Machine System Control Valve
374F Excavator Machine System Control Valve (Stick Lowering)
374F Excavator Machine System Relief Valve (Boom Lowering Control Device)
Flashing Caterpillar Display Panels Used in Certain Industrial Engines{1901, 1920, 7451, 7620}
Procedure to Request a Password to Obtain the Application File In Order to Access the IQAN Monitor for the Water Delivery System (WDS) - IQAN Studio Install and License for WDS {7610, 7620}
374F Excavator Machine System Fan Reversing Valve
G3600 A4 Engines Detonation Occurrence
Installing a New Coolant Lines Gp on Certain G3512B Petroleum Engines{1071, 1380}
G3600 A4 Engines Speed/Timing - Test
G3600 A4 Engines Sensor Signal (Analog, Active) - Test
14L Motor Grader Diesel Exhaust Fluid Injector - Remove and Install
2013/12/12 A New Exhaust Temperature Sensor Group Is Used on Certain 3500 Marine Engines {1919, 7498}