C13, C15, and C18 Tier 4 Final Engines Turbocharger Caterpillar


Turbocharger
`


Illustration 1g03509936

Table 1
Specification for 333-9830 Turbocharger Gp 
Item  Qty  Part  Specification Description 
7W-2297 Clamp As  Torque to 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in) 
9N-2038 Turbine Clamp As  Use the following procedure to tighten the band clamp:

1. Tighten the clamp to 18.0 ± 1.6 N·m (159.3 ± 14.2 lb in).
2. Loosen the clamp one to two turns.
3. Again tighten the clamp to 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)
375-2467 Flange Locknut  Before assembly, lubricate the threads and bearing surfaces with Loctite C5A Copper Anti-Seize.
Torque to 70 ± 5 N·m (52 ± 4 lb ft)

Information System:

C13, C15, and C18 Tier 4 Final Engines Turbocharger
C9.3 Tier 4 Final Engines Valve Mechanism Cover
14L Motor Grader Pressure Sensor (ARD Pilot Fuel) - Remove and Install
14L Motor Grader Pressure Sensor (ARD Main Fuel) - Remove and Install
C15 and C18 On-Highway Engines Exhaust Manifold - Remove and Install
C15 and C18 On-Highway Engines Solenoid Valve (ARD Main Fuel) - Remove and Install
C15 and C18 On-Highway Engines Exhaust Gas Valve (NRS) - Assemble
C15 and C18 On-Highway Engines Air Control Valve - Remove and Install
C15 and C18 On-Highway Engines Turbocharger - Remove and Install
C15 and C18 On-Highway Engines Electronic Unit Injector Sleeve - Remove and Install
C15 and C18 On-Highway Engines Electronic Unit Injector - Remove and Install
C15 and C18 On-Highway Engines Exhaust Cooler (NRS) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
16M Series 3, 16, 18M Series 3 and 18 Motor Grader Oil Filter (Hydraulic Return)
C15 and C18 On-Highway Engines Diesel Particulate Filter - Remove and Install - Clean Emissions Module
14L Motor Grader Machine Systems Fan and Fan Guard - Remove and Install
434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100}
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Water Pump
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear)