C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear) Caterpillar


Gear Group (Rear)
`


Illustration 1g03512216

Table 1
Specification for 364-9106 Rear Gear Gp 
Item  Qty  Part  Specification Description 
327-2566 Retainer As  Lubricate the gear journals, bearing bores and thrust faces with engine oil. 
229-1472 Gear As  Assemble the gear assembly in the engine so that the end with the oil passage plug is in the hydraulic pump adapter assembly as shown in Illustration 1.
Lubricate the gear journals, bearing bores and thrust faces with engine oil. 
326-3849 Pump Gear Assembly  Lubricate the gear journals, bearing bores and thrust faces with engine oil. 
229-1476 Adapter As  Lubricate the gear journals, bearing bores and thrust faces with engine oil. 
Outside diameter of the 209-8624 Bushing is 77.185 ± 0.020 mm (3.0388 ± 0.0008 inch).
Thickness of the bushing is 2.480 ± 0.015 mm (0.0976 ± 0.0006 inch).
Installation depth is 4.0 ± 0.5 mm (0.16 ± 0.02 inch).
6V-5141 O-Ring Seal  Lubricate the bore lightly with the fluid that is being sealed. 
325-9668 Idler Gear As  Lubricate the gear journals, bearing bores and thrust faces with engine oil. 
Outside diameter of the 209-8621 Bearing is 95.289 ± 0.026 mm (3.7515 ± 0.0010 inch).
Thickness of the bushing is 3.675 ± 0.075 mm (0.1447 ± 0.0030 inch).
209-9770 Retainer As  Lubricate the gear journals, bearing bores and thrust faces with engine oil. 
207-8211 Idler Gear As  Lubricate the gear journals, bearing bores and thrust faces with engine oil. 
Outside diameter of the 209-8621 Bearing(1) is 95.289 ± 0.026 mm (3.7515 ± 0.0010 inch).
Thickness of the bushing is 3.675 ± 0.075 mm (0.1447 ± 0.0030 inch).
(1) Bearing not to be serviced separately.

Information System:

C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Water Pump
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100}
14L Motor Grader Machine Systems Fan and Fan Guard - Remove and Install
C15 and C18 On-Highway Engines Diesel Particulate Filter - Remove and Install - Clean Emissions Module
16M Series 3, 16, 18M Series 3 and 18 Motor Grader Oil Filter (Hydraulic Return)
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C4.4 Engines for Caterpillar Built Machines Gear Group (Front)
G3600 A4 Engines Spark Plug Life Is Short
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Solenoid Return - Test
C4.4 and C7.1 Engines Fuel Pressure Problem
14L Motor Grader Battery - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fuel Injection Pump
C4.4 Engines for Caterpillar Built Machines Turbocharger
14L Motor Grader Diesel Particulate Filter - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Solenoid Valve (Switch Controlled) - Test
C15 and C18 On-Highway Engines Catalyst - Remove and Install
C15 and C18 On-Highway Engines Inlet and Exhaust Valve Springs - Remove and Install