C13, C15, and C18 Tier 4 Final Engines Turbocharger Caterpillar


Turbocharger
`


Illustration 1g03532197
Typical example


Illustration 2g06374069
Tightening sequence

Table 1
Item  Qty  Part  Specification Description 
239-5858 Compressor Clamp Assembly  Torque to 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)
9X-6620 Locknut  Use the following procedure to tighten the locknut:
1. Before assembly, lubricate the threads and bearing surfaces with Loctite® C5A Copper Anti-Seize lubricant.
2. Torque to 70 ± 5 N·m (52 ± 4 lb ft) in the numerical sequence as shown in Illustration 2. 
243-2504 Turbine Clamp As  Use the following procedure to tighten the clamp:
1. Tighten the band clamp to 18.0 ± 1.6 N·m (159.3 ± 14.2 lb in).
2. Loosen the band clamp by one to two turns.
3. Again, tighten the band clamp to 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)

Information System:

12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Electronic Control (Power Train System)
G3600 A4 Engines Oil Pressure Is High
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (PWM) - Test
C4.4 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
C4.4 Engines for Caterpillar Built Machines Connecting Rod - Inspect
C4.4 Industrial Engine Fuel Related Components in Cold Weather
C15 and C18 On-Highway Engines Valve Mechanism Cover Base - Remove and Install
C280-16 Engine Air Starting Motor - Remove and Install
C280-16 Engine Prelubrication Oil Pump - Remove and Install
Exhaust Balance Valve Causing Regeneration Issues On Certain Tier 4i C13 Engines{1061, 5479}
C11 and C13 On-Highway Engines Compression Brake Lash - Adjust
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Centershift Lock
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
G3600 A4 Engines Exhaust Temperature Is High
16M Series 3, 16, 18M Series 3 and 18 Motor Grader Power Train System
G3600 A4 Engines Exhaust Temperature Is Low
C13, C15, and C18 Tier 4 Final Engines Exhaust Combustion (ARD)
G3600 A4 Engines Alternator Problem - Charging Problem and/or Noisy Operation
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Modulating Valve (Transmission Hydraulic Control)
New IGBT Driver For UPSB505 {1401, 4480}
G3600 A4 Engines Electrical Power Supply - Test
G3600 A4 Engines Fuel Temperature Is High
3516C Marine Engine Product Lifting
3500E Marine Engines Alarms and Shutoffs