Position Sensor (Secondary Brake Control)
`
777E Prime Off-Highway Truck Systems
[M0111649]
BRAKING SYSTEM
VALVE GP
770 and 772 Off-Highway Truck Hydraulic and Braking System
Brake Valve (Parking)
773E Off-Highway Truck Steering System
Relief Valve (Primary Steering Backup)
770G and 772G Off-Highway Truck Systems
Brake Valve (Rear Service Brake, Retarder Control, Traction Control)
777E Prime Off-Highway Truck Systems
Position Sensor (Secondary Brake Control)
Show/hide table
| |
| Illustration 1 | g03567177 |
Show/hide table
| Specification for 266-1466 Position Sensor Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | - | - | At installation of position sensor, apply blue Loctite 242 to the threads of the screws. Tighten the mounting screws to the following torque |
| 2 | - | - | Required torque for turning the rotor is |
| - | - | - | Regulated operating voltage from ECM is 8 VDC |
| - | - | - | Output type is PWM. |
| - | - | - | Supply voltage is 8 VDC. |
| - | - | - | Operating temperature is |
| - | - | - | Output frequency is 500 Hz |
| - | - | - | Duty cycle is 3.5 to 94.0 % |
Information System:
2014/10/03
Cat Reman Now Offers Upgrade to New Cylinder Heads for Certain Engines {1100}
794 AC, 796 AC, and 798 AC Off-Highway Truck Advisor Monitoring System
Diagnostic Trouble Codes
G3520 Generator Set Engines
Water Temperature Regulators - Remove and Install
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
794 AC Off-Highway Truck Machine Systems
Service and Parking Brake (Front) - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor Positioned in Original Equipment Manufacture (OEM) Exhaust Tube Assembly
C3.4B Engines
Sensor (Data Link Type) - Test - Ammonia Sensor
352F Excavator
Plate Locations and Film Locations
DE Series Generator Set With Cat C7.1 Engine
Refill Capacities and Recommendations
DE Series Generator Set With Cat C7.1 Engine
Model View Illustrations
DE Series Generator Set With Cat C7.1 Engine
Safety Messages
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines
Air Shutoff - Test
C7 and C9 Industrial Engines
ECM - Replace
794 AC Off-Highway Truck Machine Systems
Service and Parking Brake (Front) - Disassemble
794 AC Off-Highway Truck Machine Systems
Service and Parking Brake (Front) - Assemble
C7 and C9 Industrial Engines
Oil Pressure Is Low
794 AC, 796 AC and 798 AC Off-Highway Truck Machine Systems
Position Sensor (Foot Brake Control)
773GC Off-Highway Truck Machine System
Position Sensor (Foot Brake Control)
C7 and C9 Industrial Engines
Oil Temperature Is High
C7 and C9 Industrial Engines
Injection Actuation Pressure Control Valve - Test
3500B Generator Sets
Maintenance Interval Schedule - Prime
3500B Generator Sets
Maintenance Interval Schedule - Standby
G3520H Generator Set Engine
Water Pump - Remove and Install
C7 and C9 Industrial Engines
Injector Solenoid - Test