G3516H and G3520H Generator Set Engines Engine Design Caterpillar


Engine Design
`
G3516H and G3520H Generator Set Engines [UENR0513]
ENGINE ARRANGEMENT
ENGINE AR
G3516H and G3520H Generator Set Engines Engine Design


Illustration 1g06605381
Cylinder and valve location
(A) Inlet valves
(B) Exhaust valves

Table 1
Item  Qty  Part  Specification Description 
Bore  170.0 mm (6.69 inch)
Stroke  215.0 mm (8.46 inch)
Displacement  105.8 L (6456 cubic inch)
Cylinder Arrangement  Vee configuration 20 cylinder. 
Crankshaft Rotation(1)  Counter clockwise rotation. 
Firing Order Sequence  1, 2, 11, 12, 3, 4, 15, 16, 7, 8, 19, 20, 9, 10, 17, 18, 5, 6, 13, 14. 
Combustion Type  Spark Ignited (SI). 
(1) Viewed from the flywheel end

Information System:

320, 320 GC, 323 and 323 GC Excavator Machine Systems Specifications Track Roller Mounting
320GX Hydraulic Excavator Machine Systems Boom Cylinder - Assemble
320GX Hydraulic Excavator Machine Systems Boom Cylinder - Disassemble
320GX Hydraulic Excavator Machine Systems Boom Cylinder - Remove and Install
320GX Hydraulic Excavator Machine Systems Stick Bearings and Seals - Remove and Install
320, 320 GC, 323 and 323 GC Excavator Machine Systems Specifications Pump Lines
320GX Hydraulic Excavator Machine Systems Stick - Remove and Install
G3520 EPA Emergency and Non-Emergency Generator Sets Engine Oil and Filter - Change
Procedure to Rework the Brake Covers in the Service Brake Group on Certain 120 Motor Graders {4251, 4267}
C9 Industrial Engines Crankshaft Rear Seal - Install
New Maintenance Interval Schedule for Engine Oil and Filter Change is Now Available On Certain Excavators {1000}
320GX Hydraulic Excavator Machine Systems Stick Cylinder - Assemble
320 GX and 323 GX Excavator Machine Systems Troubleshooting Event Codes
New Air Compressor Group Is Now Available for Certain Motor Graders {1803}
320GX Hydraulic Excavator Machine Systems Boom - Remove and Install
320GX Hydraulic Excavator Machine Systems Boom Bearings and Seals - Remove and Install
G3512H and G3516H Generator Set Engines Flywheel - Remove and Install
320 GX and 323 GX Excavator Systems Swivel
320GX Hydraulic Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
320GX Hydraulic Excavator Machine Systems Window Wiper Motor - Remove and Install - Upper
Water in Fuel Sensor O-Ring on Certain C4.4 and C7.1 Engines {7422}
777E Prime Off-Highway Truck Systems Wiring - Front
Water in Fuel Sensor O-Ring on Certain C4.4 and C7.1 Machine Engines {7422}
320 GX and 323 GX Excavator Machine Systems Troubleshooting CAN Data Link - Test