777E Prime Off-Highway Truck Systems Wiring - Cab Caterpillar


Wiring - Cab
`


Illustration 1g06607073

Table 1
Item  Qty  Part  Specification Description 
161-6984 Screw  Torque to 2.5 ± 0.2 N·m (22.1 ± 1.8 lb in)
Torque to 8.0 ± 0.5 N·m (70.8 ± 4.4 lb in)
Torque to 7.9 ± 0.5 N·m (69.9 ± 4.4 lb in)
Torque to 5.0 to 7.5 N·m (44.3 to 66.4 lb in)
9R-7941 Socket As  Torque to 5 ± 1 N·m (44 ± 9 lb in)
Torque to 9.0 ± 0.5 N·m (79.7 ± 4.4 lb in)
9X-2045 Screw  Torque to 6 ± 1 N·m (53 ± 9 lb in)
Torque to 7.9 ± 0.5 N·m (69.9 ± 4.4 lb in)
134-1374 Bolt  Torque to 5.0 ± 0.4 N·m (44.3 ± 3.5 lb in)
10  8T-4179 Bolt  Maximum torque should not exceed 40 N·m (30 lb ft)

Information System:

320, 320 GC, 323 and 323 GC Excavator Machine Systems Specifications Front Lines
320 GX and 323 GX Excavator Machine Systems Troubleshooting Connector Contact Description
777E Prime Off-Highway Truck Systems Steering Gear
320 GX and 323 GX Excavator Machine Systems Troubleshooting Operator Control Switch (Switch to Battery) - Test
323 Excavator Declaration of Conformity
777E Prime Off-Highway Truck Systems Service and Parking Brake
C4.4 Engines for Caterpillar Built Machines Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
320, 320 GC, 323 and 323 GC Excavator Machine Systems Specifications Hood
G3512H and G3516H Generator Set Engines Cylinder Head - Assemble
777E Prime Off-Highway Truck Systems Modulating Valve (Transmission Hydraulic Control)
320 GX and 323 GX Excavator Systems Solenoid Valve (Hydraulic Lockout)
777E Prime Off-Highway Truck Systems Modulating Valve (Torque Converter Lockup Clutch)
G3500 Engines Electronic Control Module (ECM)
Cat Command for Excavating, Remote Control Operator Console for Excavators Electrical Connector - Inspect
Fuel Correction Factor Calculation Procedure for Certain C32 Generator Set Engines with <NOBR>598-7998</NOBR> Engine Software {1250, 1280, 1900, 1901, 1920}
320 GX and 323 GX Excavator Systems Check Valve (Return Makeup)
777E Prime Off-Highway Truck Systems Cylinder Mounting - Suspension
336 Excavator Engine Oil and Filter - Change
320 GC & 323 GC Excavator Engine Starting
Payload Calibration When Equipped with Narrow Bucket/Work Tool May Fail on Certain 313 to 352 Excavators {6001, 6101, 6502, 7490, 7494, 7610, 7620}
Cab Avoidance Function may Not Activate When Equipped with Narrow Work Tool on Certain 313 and 315 Excavators {7490}
A New Remanufactured Part is Now Available for Certain Cat Engines {1000, 7754}
320 GX and 323 GX Excavator Systems Main Hydraulic Pump
320 GX and 323 GX Excavator Systems Pump Control (Main Hydraulic) - Main Pump Regulator