Note: Avoid touching the screen with your fingernails or sharp objects.
| |
| Illustration 1 | g06210561 |
|
Startup sequence screens | |
The display will start up automatically after turning the battery disconnect switch to the ON position. While the display is powering up, watch the start-up sequence of the system to make sure that the display is operating correctly.
| |
| Illustration 2 | g06226143 |
|
Passcode prompt screen | |
After turning the engine start ring to the ON position, the Passcode prompt screen will appear.
Enter a registered passcode on the display or use the right-side switch panel when the passcode dialog screen appears, and select ENTER to confirm passcode. If a passcode is not available, you will be able to bypass and log in as a guest. In guest mode some menu features will not be available such as the options for saving configurations and operator management.
| |
| Illustration 3 | g06584177 |
After an operator logs in to the system successfully, a message will appear on the in-cab display over the operator information screen. The message informs the user that the machine engine can be started.