Show/hide table
|
||
Show/hide table
|
||
August 2004 |
GREASE LUBRIAVSED PIN AND BUSHING GROUPS FOR 330 - 315 HYDRAULIC EXCAVATORS
Grease Lubricated Pin and Bushing Groups are now available in the parts department for 330, 325, 320S, 322, 321, 320, 319, 318, 317, and 315 Hydraulic Excavators. Each group contains pins, bushings, and track seals to service one link assembly. Typically the quantities of each component in the pin and bushing groups are based on the longest link assembly for the different models based on pitch size. The groups are provided at a value price that is less than having to buy the individual components. This will allow you to replace the pin and bushings after turn, if needed to obtain total link life wear out, providing lower cost per hour to operate the machine.
Models and Pin & Bushing Group Part Numbers
Model |
Number of Sections |
Part Number |
330C, 330B, 330 |
49 |
246-1908 * |
325C, 325B, 325, 320SC, 320S |
48 |
246-1907 * |
315C, 315B, 315, 317B, 317, 318C, 318B, 319C, 320C, 320B, 320, 321C, 322C, 322B, 322 |
51 |
246-1906 |
*Contains master track pin for press fit link assemblies. Pin and Bushing Group can be used with slip fit link assemblies, but must order slip fit master pin separately.
See Attachment I, for consist of the pin and bushing groups by model.
Custom Track Service (CTS)
When performing Custom Track Service (CTS), refer to wear charts found in the CTS Handbook 15th Edition (Media Number PEK9400-03).
Servicing
When performing service on grease lubricated track link assemblies (turning pin and bushing, replacing components), refer to Undercarriage Reconditioning Bulletin Media No. SEBF8598, dated February 2001.
The following grease lubricants are available in the parts department:
Grease Part Number |
Quantity |
Description |
161-9203 |
1 lb |
cartridge |
206-7404 |
35 lb |
5 gallon pail |
206-7405 |
120 lb |
16 gallon keg |
206-7406 |
400 lb |
55 gallon drum |
Summary
Grease lubricated link (GLT) assemblies offer a significant wear life and cost/hour advantage over comparable sealed link assemblies.
TCRobertson LAGetz
Undercarriage Marketing Division Undercarriage Marketing Division
Parts and Service Marketing Parts and Service Marketing
CV4111 ? (309) 675-7879 CV4111 ? (309) 675-3977
E-mail: Robertson_Thomas@cat.com E-mail: Getz_Lindsey_A@cat.com
Attachment I
330C, 330B, 330
8.50? (215.9mm) Pitch
Name |
Quantity |
Part Number |
Pin and Bushing Group (49 Sections) |
1 |
246-1908 |
Track Pin |
48 |
6Y-2751 |
Track Pin Master |
1 |
6Y-2748* |
Track Bushing |
48 |
201-0827 |
Track Bushing Master |
1 |
201-0828 |
Track Seal Track Seal Master |
96 2 |
179-3426 179-3428 |
* If Pin & Bushing Group is used with slip fit link assembly order: (1) 188-3066 Slip Fit Master Pin.
325C, 325B, 325, 320SC, 320S
8.00? (203.2mm) Pitch
Name |
Quantity |
Part Number |
Pin and Bushing Group (48 Sections) |
1 |
246-1907 |
Track Pin |
47 |
6Y-0851 |
Track Pin Master |
1 |
6Y-0850** |
Track Bushing |
47 |
201-0825 |
Track Bushing Master |
1 |
201-0826 |
Track Seal Track Seal Master |
94 2 |
179-3425 179-3427 |
** If Pin & Bushing Group is used with slip fit link assembly order: (1) 188-3065 Slip Fit Master Pin
315C, 315B, 315, 317B, 317, 318C, 318B, 319C, 320C,
320B, 320, 321C, 322C, 322B, 322
7.50? (190.5mm) Pitch
Name |
Quantity |
Part Number |
Pin and Bushing Group (51 Sections) |
1 |
246-1906 |
Track Pin |
50 |
6Y-8186 |
Track Pin Master |
1 |
188-3064 |
Track Bushing |
50 |
190-3523 |
Track Bushing Master |
1 |
190-3524 |
Track Seal Track Seal Master |
100 2 |
158-4380 158-4381 |
Show/hide table
|