3412E Petroleum Engine Diagnostic Code Cross Reference Caterpillar


Diagnostic Code Cross Reference
`

Problems with the electronic control system are reported via these types of codes: flash codes, diagnostic codes and event codes.

For information on flash codes, refer to Troubleshooting, "Flash Codes".

For information on diagnostic codes, refer to Troubleshooting, "Diagnostic Codes".

For information on event codes, refer to Troubleshooting, "Event Codes".

Use Table 1 as a cross-reference between the various types of codes.

Table 1
Flash Code     Diagnostic Code
or
Event Code    
Description of Code    
N/A     E016     High Engine Coolant Temperature Shutdown    
N/A     E017     High Engine Coolant Temperature Warning    
N/A     E040     Low Engine Oil Pressure Shutdown    
N/A     E053     Low Fuel Pressure Warning    
N/A     E058     Low Engine Coolant Level Shutdown    
N/A     E059     Low Engine Coolant Level Warning    
N/A     E100     Low Engine Oil Pressure Warning    
N/A     E164     High Injection Actuation Pressure    
N/A     E190     Engine Overspeed Warning    
N/A     1835-03     Auxiliary Pressure Sensor open/short to +batt    
N/A     1835-04     Auxiliary Pressure Sensor short to ground    
N/A     1836-03     Auxiliary Temperature Sensor open/short to +batt    
N/A     1836-04     Auxiliary Temperature Sensor short to ground    
13     174-03     Fuel Temperature open/short to +batt    
13     174-04     Fuel Temperature short to ground    
14     42-05     Injector Actuation Valve open circuit    
14     42-06     Injector Actuation Valve short to ground    
17     168-00     System Voltage High    
17     168-01     System Voltage Low    
17     168-02     System Voltage intermittent/erratic    
21     262-03     5 Volt Sensor DC Power Supply short to +batt    
21     262-04     5 Volt Sensor DC Power Supply short to ground    
21     263-03     Digital Sensor Supply short to +batt    
21     263-04     Digital Sensor Supply short to ground    
24     100-03     Engine Oil Pressure open/short to +batt    
24     100-04     Engine Oil Pressure short to ground    
25     273-00     Turbo Outlet Pressure above normal    
25     273-03     Turbo Outlet Pressure open/short to +batt    
25     273-04     Turbo Outlet Pressure short to ground    
26     274-03     Atmospheric Pressure open/short to +batt    
26     274-04     Atmospheric Pressure short to ground    
27     110-03     Engine Coolant Temperature open/short to +batt    
27     110-04     Engine Coolant Temperature short to ground    
28     91-13     Throttle Position calibration required    
32     91-08     Throttle Position signal abnormal    
34     190-02     Loss of Engine Speed signal    
34     190-03     Engine Speed open/short to +batt    
34     190-07     Primary Speed Sensor misinstalled    
34     190-08     Engine Speed abnormal    
34     342-02     Loss of Secondary Engine Speed signal    
34     342-03     Secondary Engine Speed open/short to +batt    
34     342-07     Secondary Speed Sensor misinstalled    
34     342-08     Secondary Engine Speed signal abnormal    
37     94-03     Fuel Pressure open/short to +batt    
37     94-04     Fuel Pressure short to ground    
37     175-03     Engine Oil Temperature open/short to +batt    
37     175-04     Engine Oil Temperature short to ground    
38     105-03     Inlet Manifold Temp Sensor open/short to +batt    
38     105-04     Inlet Manifold Temp Sensor short to ground    
42     261-13     Engine Timing Calibration required    
42     273-13     Turbo Outlet Pressure calibration required    
42     274-13     Atmospheric Pressure calibration required    
43     164-03     Injector Actuation Pressure voltage high    
43     164-04     Injector Actuation Pressure voltage low    
53     254-12     Electronic Control Module Error    
56     253-02     Personality Module mismatch    
56     268-02     Check Programmable Parameters    
71     1-05     Injector Cylinder 1 open circuit    
71     1-06     Injector Cylinder 1 short    
72     2-05     Injector Cylinder 2 open circuit    
72     2-06     Injector Cylinder 2 short    
73     3-05     Injector Cylinder 3 open circuit    
73     3-06     Injector Cylinder 3 short    
74     4-05     Injector Cylinder 4 open circuit    
74     4-06     Injector Cylinder 4 short    
75     5-05     Injector Cylinder 5 open circuit    
75     5-06     Injector Cylinder 5 short    
76     6-05     Injector Cylinder 6 open circuit    
76     6-06     Injector Cylinder 6 short    
77     7-05     Injector Cylinder 7 open circuit    
77     7-06     Injector Cylinder 7 short    
78     8-05     Injector Cylinder 8 open circuit    
78     8-06     Injector Cylinder 8 short    
81     9-05     Injector Cylinder 9 open circuit    
81     9-06     Injector Cylinder 9 short    
82     10-05     Injector Cylinder 10 open circuit    
82     10-06     Injector Cylinder 10 short    
83     11-05     Injector Cylinder 11 open circuit    
83     11-06     Injector Cylinder 11 short    
84     12-05     Injector Cylinder 12 open circuit    
84     12-06     Injector Cylinder 12 short    

Information System:

3412E Petroleum Engine Intermittent Engine Shutdown
C9.3 Tier 4 Final Engines Fuel Filter Base
2005/01/17 New Bearings for the Engine Oil Pump are Available {1304}
C7 Engines for Caterpillar Built Machines Cooling System - Test
3500 and 3500B Engines Aftercooler Core - Inspect/Clean
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Charge
3412E Petroleum Engine Auxiliary Temperature Sensor Circuit - Test
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Evacuate
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E43 - Damper (Air Outlet)
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Visual Inspection
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating General Troubleshooting Information
312C, 322C, 325C and 330C Excavators and TK1051 Track Feller Buncher Air Conditioning and Heating Machine Preparation for Troubleshooting
3508B, 3512B and 3516B Generator Set Engines Engine Oil Sequence Valves - Remove and Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Remove
C32 Marine Engines Event Codes
C11 and C13 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
3508B, 3512B and 3516B Generator Set Engines Balancer Group (Front) - Remove and Install - 3508B Engine
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Flush
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Recovery
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Required Tools
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Compressor Oil - Check
C11 and C13 Engines for Caterpillar Built Machines Alternator - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install