C7 Engines for Caterpillar Built Machines Water Pump - Assemble Caterpillar


Water Pump - Assemble
`
C7 Engines for Caterpillar Built Machines [RENR9218]
COOLING SYSTEM
PUMP GP-WATER
C7 Engines for Caterpillar Built Machines Water Pump - Assemble
C7 Engines for Caterpillar Built Machines Water Pump - Remove
1.1. Assembly Procedure

Assembly Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1P-0510  Driver Gp 
5P-9722  Seal Driver 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01124833

  1. Use Tooling (A) and a suitable press to install pulley (9) on shaft assembly (8).

  2. Use Tooling (B) and a suitable press to install seal assembly (6) in housing (7).

  3. Use Tooling (A) and a suitable press to install shaft assembly (8) into housing (7). Install the shaft assembly until the bearing is flush with the housing.

  4. Use Tooling (A) and a suitable press to install impeller (5) on shaft assembly (8). Install the impeller until the distance between the impeller and the machined surface of the water pump is 0.75 ± 0.25 mm (0.030 ± 0.010 inch).

  5. Install new gasket (4).

  6. Position cover (3) and install bolts (2). Install new O-ring seals (1).

End By:

  1. Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".

Information System:

C7 On-Highway Engine Water Pump - Remove
3500B and 3500 Marine Propulsion Engines with EUI Option Belts - Inspect/Adjust/Replace
3500B and 3500 Marine Propulsion Engines with EUI Option Refill Capacities and Recommendations
3500B and 3500 Marine Propulsion Engines with EUI Option Product Lifting
C27 and C32 Engines Fuel System Pressure - Test
2004/12/01 New Ignition Transformers are Used {1561}
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Relief Valve (Swing)
C7 On-Highway Engine Engine Oil Filter Base and Oil Cooler - Remove
3500B High Displacement Generator Set Engines Alternator and Fan Belts - Inspect/Adjust/Replace
C27 and C32 Engines Water Pump - Test
3500 and 3500B Engines Refill Capacities and Recommendations
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Remove
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Install
345C, 365C and 385C Excavators Air Conditioning and Heating Air Conditioner Lines
3500 Engines Connecting Rod Bearings - Remove and Install
854G Wheel Dozer High Intensity Discharge Lamp (HID) - Replace - If Equipped
3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Install
3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Remove
C32 Marine Engines Sensors and Electrical Connectors
345 MHPUC Mobile Hydraulic Power Unit Machine System Specifications Relief Valve (Main) - Heavy Lift
345C Excavator Machine System Specifications Relief Valve (Main)
2004/12/01 A New Aftercooler Cover is Now Used {1063, 1063}
345C Excavator Machine System Specifications Hydraulic Tank and Filter