14L Motor Grader Temperature Sensor (Catalyst Inlet) - Remove and Install Caterpillar


Temperature Sensor (Catalyst Inlet) - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
LOCTITE C5-A Copper Antiseize 


    Illustration 1g03499598

  1. Cut cable strap (1). Remove sensor (2).


    Illustration 2g03499600

  2. Cut cable straps (3) and (4).


    Illustration 3g03504791

  3. Remove panel (5).


    Illustration 4g03499601

  4. Cut cable straps (6), (7), and (8).


    Illustration 5g03499603

  5. Disconnect harness assembly (9). Cut cable strap (10). Remove temperature sensor assembly (11).

Installation Procedure

  1. Install temperature sensor assembly (11) in the reverse order of removal.

    1. Apply Tooling (A) to the threads of temperature sensor (2).

    2. Tighten temperature sensor (2) to a torque of 45 ± 5 N·m (33 ± 4 lb ft).

Information System:

14L Motor Grader Solenoid Valve (ARD Fuel) - Remove and Install - Pilot
C7 and C9 Industrial Engines Exhaust Has Excessive Black Smoke
C8.7 and C12.9 Marine Engines Engine Vibration Is Excessive
C27 and C32 Engines for Caterpillar Built Machines Engine Overspeeds
C280-08 Tier 4 Engine Solenoid Valve (DEF Return) - Remove and Install
14L Motor Grader Solenoid Valve (ARD Fuel) - Remove and Install - Main
C280-08 Tier 4 Engine Pressure Sensor (Diesel Exhaust Fluid) - Remove and Install
2013/11/04 New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
14L Motor Grader Clean Emissions Module - Remove and Install
C280-08 Tier 4 Engine Solenoid Valve (DEF Air) - Remove and Install
C280-08 Tier 4 Engine Regulator (DEF Air) - Remove and Install
2013/10/28 Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
C7 and C9 Industrial Engines Power Is Intermittently Low or Power Cutout Is Intermittent
14L Motor Grader Engine - Remove and Install
C4.4 Industrial Engine Engine Oil and Filter - Change
C280-08 Tier 4 Engine Pressure Sensor (DEF Air) - Remove and Install
G3600 A4 Engines System Overview
374F Excavator Machine Systems Overload Warning - Set - If Equipped
G3600 A4 Engines Electrical Connectors
G3600 A4 Engines Diagnostic Trouble Codes
C280-08 Tier 4 Engine Manifold (Diesel Exhaust Fluid) - Remove and Install
14L Motor Grader Nozzle Heater Harness - Remove and Install
14L Motor Grader Catalyst (SCR) - Remove and Install
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Location of Components (Hydraulic System)