C280-08 Tier 4 Engine Pressure Sensor (DEF Air) - Remove and Install Caterpillar


Pressure Sensor (DEF Air) - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

  1. Turn off the diesel exhaust fluid supply to the dosing cabinet.

  2. Turn off the power supply to the dosing cabinet.

  3. Wait 30 seconds, then turn off the air supply to the dosing cabinet.


    Illustration 1g03498659

  4. Remove panel (1).


    Illustration 2g03500757

  5. Disconnect harness assembly (2).

  6. Remove pressure sensor (3).


    Illustration 3g03499238

  7. Remove O-ring seal (4).

Installation Procedure

  1. Install pressure sensor (3) in the reverse order of removal.

    1. Tighten pressure sensor (3) to a torque of 10 ± 2 N·m (89 ± 18 lb in).

Information System:

C4.4 Industrial Engine Engine Oil and Filter - Change
14L Motor Grader Engine - Remove and Install
C7 and C9 Industrial Engines Power Is Intermittently Low or Power Cutout Is Intermittent
14L Motor Grader Temperature Sensor (Catalyst Inlet) - Remove and Install
14L Motor Grader Solenoid Valve (ARD Fuel) - Remove and Install - Pilot
C7 and C9 Industrial Engines Exhaust Has Excessive Black Smoke
C8.7 and C12.9 Marine Engines Engine Vibration Is Excessive
C27 and C32 Engines for Caterpillar Built Machines Engine Overspeeds
C280-08 Tier 4 Engine Solenoid Valve (DEF Return) - Remove and Install
14L Motor Grader Solenoid Valve (ARD Fuel) - Remove and Install - Main
C280-08 Tier 4 Engine Pressure Sensor (Diesel Exhaust Fluid) - Remove and Install
2013/11/04 New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
G3600 A4 Engines System Overview
374F Excavator Machine Systems Overload Warning - Set - If Equipped
G3600 A4 Engines Electrical Connectors
G3600 A4 Engines Diagnostic Trouble Codes
C280-08 Tier 4 Engine Manifold (Diesel Exhaust Fluid) - Remove and Install
14L Motor Grader Nozzle Heater Harness - Remove and Install
14L Motor Grader Catalyst (SCR) - Remove and Install
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Location of Components (Hydraulic System)
C280-08 Tier 4 Engine Solenoid Valve (DEF Supply) - Remove and Install
C280-12 Marine Engine Product Description
C280-08 Tier 4 Engine Liquid Level Sensor (DEF) - Remove and Install
C280-08 Tier 4 Engine Filter Screen (Air) - Remove and Install