C15 and C18 On-Highway Engines Solenoid Valve (ARD Main Fuel) - Remove and Install Caterpillar


Solenoid Valve (ARD Main Fuel) - Remove and Install
`
C15 and C18 On-Highway Engines [UENR3300]
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP
C15 and C18 On-Highway Engines Solenoid Valve (ARD Main Fuel) - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g02798230

  1. Remove solenoid valve (1).


    Illustration 2g02798233

  2. Remove nut (6), washer (5), and solenoid (4).

  3. Remove cartridge assembly (3) and remove O-ring seals (12).

Installation Procedure

  1. Install solenoid valve (1) in the reverse order of removal.

    1. Tighten nut (6) to a torque of 20 ± 2.5 N·m (177 ± 22 lb in).

    2. Tighten solenoid valve (1) to a torque of 50 ± 5 N·m (37 ± 4 lb ft).

Information System:

C15 and C18 On-Highway Engines Exhaust Gas Valve (NRS) - Assemble
C15 and C18 On-Highway Engines Air Control Valve - Remove and Install
C15 and C18 On-Highway Engines Turbocharger - Remove and Install
C15 and C18 On-Highway Engines Electronic Unit Injector Sleeve - Remove and Install
C15 and C18 On-Highway Engines Electronic Unit Injector - Remove and Install
C15 and C18 On-Highway Engines Exhaust Cooler (NRS) - Remove and Install
C15 and C18 On-Highway Engines Fuel Manifold (ARD) - Remove and Install
C15 and C18 On-Highway Engines Fuel Pressure Regulator - Remove and Install
C15 and C18 On-Highway Engines Fuel Transfer Pump - Remove and Install
C15 and C18 On-Highway Engines Fuel Filter Base - Remove and Install - Secondary
3500 Petroleum Engines and Petroleum Generator Sets Gauges and Indicators
C15 and C18 On-Highway Engines Fuel Priming Pump - Remove and Install
C15 and C18 On-Highway Engines Exhaust Manifold - Remove and Install
14L Motor Grader Pressure Sensor (ARD Main Fuel) - Remove and Install
14L Motor Grader Pressure Sensor (ARD Pilot Fuel) - Remove and Install
C9.3 Tier 4 Final Engines Valve Mechanism Cover
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
16M Series 3, 16, 18M Series 3 and 18 Motor Grader Oil Filter (Hydraulic Return)
C15 and C18 On-Highway Engines Diesel Particulate Filter - Remove and Install - Clean Emissions Module
14L Motor Grader Machine Systems Fan and Fan Guard - Remove and Install
434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100}