14L Motor Grader Battery - Remove and Install Caterpillar


Battery - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure



    Illustration 1g03512796

  1. Turn battery disconnect switch (1) to the OFF position.


    Illustration 2g03512756

  2. Reposition battery terminal covers (2) and (3).


    Illustration 3g03512757

  3. Disconnect battery cables (4) and (5).


    Illustration 4g03512758

  4. Remove nuts (6) and the washers . Remove battery holddown assembly (7).


    Illustration 5g03512777

  5. Remove studs (8). Use two people in order to remove batteries (9). The weight of each battery is approximately 27 kg (60 lb).

Installation Procedure

  1. Install batteries (9) in the reverse order of removal.

    1. Tighten nuts (6) to a torque of 12 ± 2 N·m (106 ± 18 lb in).

Information System:

C4.4 and C7.1 Engines Fuel Pressure Problem
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Solenoid Return - Test
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
G3600 A4 Engines Spark Plug Life Is Short
C4.4 Engines for Caterpillar Built Machines Gear Group (Front)
C13, C15, and C18 Tier 4 Final Engines Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C13, C15, and C18 Tier 4 Final Engines Water Pump
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
434-6509 Water Ferrule Pressure Tool{0374, 0599, 0701, 0703, 1100}
C4.4 Engines for Caterpillar Built Machines Fuel Injection Pump
C4.4 Engines for Caterpillar Built Machines Turbocharger
14L Motor Grader Diesel Particulate Filter - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Solenoid Valve (Switch Controlled) - Test
C15 and C18 On-Highway Engines Catalyst - Remove and Install
C15 and C18 On-Highway Engines Inlet and Exhaust Valve Springs - Remove and Install
C15 and C18 On-Highway Engines Inlet and Exhaust Valves - Remove and Install
C15 and C18 On-Highway Engines Inlet and Exhaust Valve Guides - Remove and Install
C15 and C18 On-Highway Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 and C18 On-Highway Engines Water Pump - Remove and Install
C175-16 Engine Fuel Flow Is High
C15 and C18 On-Highway Engines Precooler - Remove and Install