793F Tier IV Off-Highway Truck Field Assembly Films - Install Caterpillar


Films - Install
`
1.1. Parts and Specification Information
2.1. Installation Procedure

Parts and Specification Information



Illustration 1g03526576

Note: Verifying all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.

Table 1
Item  Part Number  Part Description  Qty  Specification  Approximate Weight 
295-6681 Film Gp, 337-7883 Film Gp, or 371-6741 Film Gp 
299-7929  Film     
299-7935  Film     
299-7930  Film     

Installation Procedure



    Illustration 2g03526639
    (1) 299-7929 Film
    (A) 16.0 ± 3.0 mm (0.63 ± 0.12 inch)
    (B) 16.0 ± 3.0 mm (0.63 ± 0.12 inch)

  1. Clean the surface of the body and canopy with isopropyl alcohol. Thoroughly dry the surface before applying the film. Install one film (1) to Dimension (A) and Dimension (B). Ensure that the film is free of air bubbles.


    Illustration 3g03526660
    (3) 299-7930 Film
    (C) 16.0 ± 3.0 mm (0.63 ± 0.12 inch)
    (D) 16.0 ± 3.0 mm (0.63 ± 0.12 inch)

  2. Clean the surface of the body and canopy with isopropyl alcohol. Thoroughly dry the surface before applying the film. Install one film (3) to Dimension (C) and Dimension (D). Ensure that the film is free of air bubbles.


    Illustration 4g03526664
    (3) 299-7935 Film
    (E) 20.0 ± 3.0 mm (0.79 ± 0.12 inch)
    (F) 38.0 ± 3.0 mm (1.50 ± 0.12 inch)

  3. Clean the surface of the body and canopy with isopropyl alcohol. Thoroughly dry the surface before applying the film. Install one film (2) to Dimension (E) and Dimension (F). Ensure that the film is free of air bubbles.

Information System:

C175 Oil Pressure Regulator Inspection and Rework{1304, 5117}
140, 150, 160, 12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Service Interval Chart
C11 and C13 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
TA2 Technical Inspection for 3512B Dynamic Gas Blending Genset Engines{1000, 1050, 1250, 1300, 1350, 1400}
C15 and C18 On-Highway Engines Engine Oil Pan - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Water in Fuel - Test
C15 and C18 On-Highway Engines Camshaft - Remove and Install
C15 and C18 On-Highway Engines Camshaft - Remove and Install
3516C Marine Engine Model View Illustrations
Procedure for Installing the 450-6188 Solenoid Valve Gp and 450-3897 Wiring Harness on G3500 Petroleum Engines{5479}
3516C Marine Engine Catalyst (SCR) - Replace
C280-16 Engine Exhaust Manifold Shield - Remove and Install
793F Tier IV Off-Highway Truck Field Assembly Wheel Chock - Install
C280-08 Marine Engine Plate Locations and Film Locations
C15 and C18 On-Highway Engines Vibration Damper and Pulley - Remove and Install
C4.4 Engines for Caterpillar Built Machines Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C15 and C18 On-Highway Engines Front Cover - Remove and Install
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Centershift Lock
C11 and C13 On-Highway Engines Compression Brake Lash - Adjust
Exhaust Balance Valve Causing Regeneration Issues On Certain Tier 4i C13 Engines{1061, 5479}
C280-16 Engine Prelubrication Oil Pump - Remove and Install
C280-16 Engine Air Starting Motor - Remove and Install
C15 and C18 On-Highway Engines Valve Mechanism Cover Base - Remove and Install
C4.4 Industrial Engine Fuel Related Components in Cold Weather