EPC Parts Catalogs

793F Tier IV Off-Highway Truck Field Assembly Wheel Chock - Install Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #203428
Wheel Chock - Install
`
793F Tier IV Off-Highway Truck Field Assembly [M0072770]
793F Tier IV Off-Highway Truck Field Assembly Films - Install
793F Tier IV Off-Highway Truck Field Assembly Engine Aftertreatment System - Install
POWER TRAIN
TOOLS
793F Tier IV Off-Highway Truck Field Assembly Wheel Chock - Install
1.1. Parts and Specification Information
2.1. Installation Procedure

Parts and Specification Information

Show/hide table
Illustration 1g03526342

Note: Verifying all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.

Show/hide table
Table 1
Item  Part Number  Part Description  Qty  Specification  Approximate Weight 
361-0053 Wheel Chock Gp or 361-0050 Wheel Chock Gp  
1  365-7480  Bracket As  1     
2  425-0953(1)  Wheel Chocks  2     
3  5P-8837  Lock Pins  4     
4  365-7474  Rod  1     
Show/hide table
(1) Use only AVSpare supplied wheel chocks on the 793F CMD Off-Highway Truck, as aftermarket wheel chocks may interfere with the view of the front radars.

Installation Procedure

    Show/hide table
    Illustration 2g03526344
    (5) 8T-4956 Bolts (M12X1.75X35-MM)
    (6) 5P-1076 Hard Washers

  1. Remove three bolts (5) and three hard washers (6). Retain all hardware.
    Show/hide table
    Illustration 3g03526345
    (1) 365-7480 Bracket As
    (3) 5P-8837 Lock Pins
    (4) 365-7474 Rod
    (5) 8T-4956 Bolts (M12X1.75X35-MM)
    (6) 5P-1076 Hard Washers

  2. Install one bracket assembly (1), three hard washers (6), and three bolts (5).

  3. Install one rod (4) and two lock pins (3).
    Show/hide table
    Illustration 4g03526346
    (2) 425-0953 Wheel Chocks or 341-3031 Wheel Chocks
    (3) 5P-8837 Lock Pins

    Note: Use 341-3031 Wheel Chocks for RBT to avoid interference of the radars.

  4. Install two wheel chocks (2) and two lock pins (3).

Information System:

793F Tier IV Off-Highway Truck Field Assembly Films - Install
C175 Oil Pressure Regulator Inspection and Rework{1304, 5117}
140, 150, 160, 12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Service Interval Chart
C11 and C13 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
TA2 Technical Inspection for 3512B Dynamic Gas Blending Genset Engines{1000, 1050, 1250, 1300, 1350, 1400}
C15 and C18 On-Highway Engines Engine Oil Pan - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Water in Fuel - Test
C15 and C18 On-Highway Engines Camshaft - Remove and Install
C15 and C18 On-Highway Engines Camshaft - Remove and Install
3516C Marine Engine Model View Illustrations
Procedure for Installing the 450-6188 Solenoid Valve Gp and 450-3897 Wiring Harness on G3500 Petroleum Engines{5479}
3516C Marine Engine Catalyst (SCR) - Replace
C280-08 Marine Engine Plate Locations and Film Locations
C15 and C18 On-Highway Engines Vibration Damper and Pulley - Remove and Install
C4.4 Engines for Caterpillar Built Machines Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C15 and C18 On-Highway Engines Front Cover - Remove and Install
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Centershift Lock
C11 and C13 On-Highway Engines Compression Brake Lash - Adjust
Exhaust Balance Valve Causing Regeneration Issues On Certain Tier 4i C13 Engines{1061, 5479}
C280-16 Engine Prelubrication Oil Pump - Remove and Install
C280-16 Engine Air Starting Motor - Remove and Install
C15 and C18 On-Highway Engines Valve Mechanism Cover Base - Remove and Install
C4.4 Industrial Engine Fuel Related Components in Cold Weather
C4.4 Engines for Caterpillar Built Machines Connecting Rod - Inspect