C280-16 Engine Air Starting Motor - Remove and Install Caterpillar


Air Starting Motor - Remove and Install
`
C280-16 Engine [UENR3297]
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
C280-16 Engine Air Starting Motor - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure



    Illustration 1g03531050

  1. Disconnect hose assembly (1), hose assembly (2), and pipe (3).


    Illustration 2g03531280

  2. Disconnect hose assembly (4), and hose assembly (7).

  3. Remove nuts (5) and control valve (6).


    Illustration 3g03531560

  4. Remove nuts (9) and control valve (8).


    Illustration 4g03531797

  5. Remove bolts (10) and air starting motor (11). Air starting motor (11) weighs approximately 23 kg (51 lb).

Installation Procedure

  1. Install air starting motor (11) in the reverse order of removal.

Information System:

C280-16 Engine Prelubrication Oil Pump - Remove and Install
Exhaust Balance Valve Causing Regeneration Issues On Certain Tier 4i C13 Engines{1061, 5479}
C11 and C13 On-Highway Engines Compression Brake Lash - Adjust
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Centershift Lock
C15 and C18 On-Highway Engines Front Cover - Remove and Install
C4.4 Engines for Caterpillar Built Machines Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C15 and C18 On-Highway Engines Vibration Damper and Pulley - Remove and Install
C280-08 Marine Engine Plate Locations and Film Locations
793F Tier IV Off-Highway Truck Field Assembly Wheel Chock - Install
793F Tier IV Off-Highway Truck Field Assembly Films - Install
C175 Oil Pressure Regulator Inspection and Rework{1304, 5117}
140, 150, 160, 12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Service Interval Chart
C15 and C18 On-Highway Engines Valve Mechanism Cover Base - Remove and Install
C4.4 Industrial Engine Fuel Related Components in Cold Weather
C4.4 Engines for Caterpillar Built Machines Connecting Rod - Inspect
C4.4 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (PWM) - Test
G3600 A4 Engines Oil Pressure Is High
12M Series 3, 140M Series 3, 160M Series 3, 140, 150 and and 160 Motor Graders Electronic Control (Power Train System)
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
G3600 A4 Engines Exhaust Temperature Is High
16M Series 3, 16, 18M Series 3 and 18 Motor Grader Power Train System
G3600 A4 Engines Exhaust Temperature Is Low