Flywheel - Remove and Install
`
G3512H and G3516H Generator Set Engines
[UENR0110]
G3512H and G3516H Generator Set Engines
Pistons and Connecting Rods - Remove and Install
G3512H and G3516H Generator Set Engines
Cylinder Head - Disassemble
BASIC ENGINE
FLYWHEEL GP
3508C, 3512C and 3516C Marine Engines
Flywheel - Remove and Install
G3512H and G3516H Generator Set Engines
Flywheel - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 589-7433 | Link Bracket As | 2 |
| B | - | 1-14 x 6 inch Guide Stud | 2 |
- Attach Tooling (A) and a suitable lifting device to flywheel assembly (1). The weight of flywheel assembly (1) is approximately
167 kg (369 lb) . - Remove 2 bolts (2).
Show/hide table
Illustration 2 g06606102 - Install Tooling (B).
- Remove remaining bolts (2) and flywheel assembly (1).
Show/hide table
| |
| Illustration 1 | g06606048 |
- Install flywheel assembly (2) in the reverse order of removal.
- Apply clean engine oil to the threads of bolts (2).
- Tighten bolts (2) to a torque of
1150 ± 60 N·m (848 ± 44 lb ft) .
Information System:
320GX Hydraulic Excavator Machine Systems
Boom Bearings and Seals - Remove and Install
320GX Hydraulic Excavator Machine Systems
Boom - Remove and Install
New Air Compressor Group Is Now Available for Certain Motor Graders {1803}
320 GX and 323 GX Excavator Machine Systems Troubleshooting
Event Codes
G3516H and G3520H Generator Set Engines
Engine Design
320, 320 GC, 323 and 323 GC Excavator Machine Systems Specifications
Track Roller Mounting
320GX Hydraulic Excavator Machine Systems
Boom Cylinder - Assemble
320GX Hydraulic Excavator Machine Systems
Boom Cylinder - Disassemble
320GX Hydraulic Excavator Machine Systems
Boom Cylinder - Remove and Install
320GX Hydraulic Excavator Machine Systems
Stick Bearings and Seals - Remove and Install
320, 320 GC, 323 and 323 GC Excavator Machine Systems Specifications
Pump Lines
320GX Hydraulic Excavator Machine Systems
Stick - Remove and Install
320 GX and 323 GX Excavator Systems
Swivel
320GX Hydraulic Excavator Machine Systems
Upper Frame and Undercarriage Frame - Separate
320GX Hydraulic Excavator Machine Systems
Window Wiper Motor - Remove and Install - Upper
Water in Fuel Sensor O-Ring on Certain C4.4 and C7.1 Engines {7422}
777E Prime Off-Highway Truck Systems
Wiring - Front
Water in Fuel Sensor O-Ring on Certain C4.4 and C7.1 Machine Engines {7422}
320 GX and 323 GX Excavator Machine Systems Troubleshooting
CAN Data Link - Test
C9 On-highway Engine
Crankshaft Rear Seal - Install
777E Prime Off-Highway Truck Systems
Wiring - Battery
G3512H and G3516H Generator Set Engines
Cylinder Head - Disassemble
777E Prime Off-Highway Truck Systems
Hood
C9 Urban Transit Bus Engine
Crankshaft Rear Seal - Install